Sunday, January 26, 2014

Padded Waist and Legs Out Padding for Table Cloth Mei Tai

Mahogany Orange Peacock Tablecloth available HERE
This mini-tutorial is a supplement to my Tablecloth Mei Tai with Wrap Style Straps tutorial. If you're feeling lost, start at that link! If you've come from that link, welcome! This tutorial will demonstrate a few pretty simple additional steps to add padding to your TCMT. This tutorial assumes that you have gotten to the point of attaching the straps to the internal layer in the previous tutorial.

For the padding, you will need 3 pieces of fleece. The piece for the waist padding should be about 15" high and about an inch shorter than the width of the waist band on your inner (canvas/twill/etc.) layer. The pieces for the legs-out padding should be about 6" X 6". These are the approximate measurements that I use, but do what works!

Adding the Padding

Fold each piece in half, then in half again, so that they are 4-layers thick. Pin these to the inner panel on the side your straps are attached to, then zig-zag stitch around the edge of each piece to attach it to the panel.

At this point, I am copying and pasting the instructions for sewing the panels all together, with a few small changes:

Pin the Body Panel pieces together.


Lay down your inner panel piece with the attached straps on a flat surface, 
with the strap attachments and padding facing up. 

Lay the panel that will be the "back" of your MT on top of the inner panel, right side facing UP.
Lay the "front" panel of your MT on top of that, right side facing DOWN.

Line everything up and
PIN, PIN, PIN!

Sew the Panels Together.

Sew around the top and sides of the body panels, but DO NOT sew across the straps/strap openings!
Sew up each side, again, starting/stopping within an inch of the straps.
Sew across the top, you guessed it, starting/stopping within an inch of the straps.
Leave the bottom open.

IT IS IMPERATIVE THAT YOU DO NOT SEW OVER THE STRAPS/OPENINGS!

Once you have sewn the 3 panels together along the top, bottom, and sides, 
you are ready to turn your MT right side out through the bottom and strap openings.



Fold under the bottom edges and press with an iron, then pin.
Fold under the all strap openings, press and pin.


Top stitch!

Top stitch around the edge of the entire carrier, starting at the bottom and going all the way around, ensuring that you are sewing through all layers. Top stitch straight across the top of the waist band. If you'd like, you can top stitch a few straight lines across the middle of the padded waist band, or top stitch a rectangle (or any other shape/top-stitching your little heart desires! This is personal preference!) Top stitch about 1/4" in from your top-stitched edge all the way around carrier, but when you come to the legs-out padding, top stitch around the edges of it. 

You're done! Please don't hesitate to visit my facebook page and leave a comment if you have questions or need clarification on any of the steps. I also LOVE to see your creations! :) 

Happy Sewing, and Happy Babywearing! :)

7 comments:

  1. What are the benefits of adding the padding? Is it more comfortable? I'm making my first mei tai soon but I've never used one before so I'm trying to decide what I should include. Thanks!

    ReplyDelete
  2. hi, it is possible to transform a meitai into an onbuhimo? thanks

    ReplyDelete
    Replies
    1. https://www.youtube.com/watch?v=g7Kx7hRb7qA
      here's a vid of it

      Delete
  3. Choosing the right baby clothing for your kids is not difficult if you consider the tips mentioned in this article. You can also ask your friends and loved ones for tips before buying clothes for your children.
    Nešioklės kūdikiams

    ReplyDelete
  4. These are some of the tips that will help you to dress comfortably and professionally in the summer season. https://spreeglee.com

    ReplyDelete
  5. Gear up for backpacking and camping trips with gear bags and camping bags that are reliable and sturdy to endure whatever adventure you encounter. Stay hydrated with hydration packs and always bring survival and navigation gear in a fanny pack or gear bag. .. waist pack with water bottle holder

    ReplyDelete
  6. Wow, cool post. I'd like to write like this too - taking time and real hard work to make a great article... but I put things off too much and never seem to get started. Thanks though. inumidire sinonimo

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...